The Santa Cruz Bronson CC frame with Rock Shox Monarch Plus RC3-shock
When Santa Cruz introduced Bronson, it took the market by storm, redefining what people expected from a 150mm trail bike. Equally at home in the Trans-Provence as it was on The Ridge, updating and improving it was going to be no small feat.
The most visible upgrade is the completely new VPP® link arrangement. The lower link tucks neatly above the bottom bracket, fully-recessed and protected from impacts. Meanwhile the box-section upper link now mounts cleanly to the top tube and enhances lateral stiffness as a result. Shock rates been refined in the process too, delivering greater small bump sensitivity and a more progressive mid-stroke.
Geometry has also evolved subtly to meet demand from riders for a bike of this ilk. The seat tube angles been steepened, placing the rider right above the cranks and perfectly in position to lay down the power. Meanwhile a one-degree slacker 66 degree head tube angle combines with a 20-25mm longer top tube and shorter chainstay length to create an evermore rally-ready geometry than its predecessor.
148mm Rear Axle Spacing
150mm (6") VPP suspension
Angular contact bearings maximize stiffness
Bottle cage mount within front triangle fits piggyback shocks
Collet axle pivots lock in place without pinch bolts
Double sealed pivots for long bearing life
Full carbon dropouts and disk mounts
Full carbon frame and swingarm
ISCG05 tabs (carbon frames only)
Molded rubber swingarm and downtube protection
Sizes: S, M, L, XL
Stealth and external seatpost cable routing
Threaded Bottom Bracket
Direct to Frame
mixed taper 1.5" Lower, 1'1/8" upper
Eye to Eye length
Max Tire Size
Water Bottle Mounts
2x bottle cage mounts
Scope of delivery
Bronson CC (see item description for details)
Wie kommt mein neues Fahrrad bei mir an? Wie baue ich es auf? Antworten im Video.