Worldwide shipping, reasonable rates
More than 20 years online
1.000m² retail store in D-Kronberg
Lieferung nach: GB

Log out
Order status

Enduro Bearings 6800 ball bearing 6800 ABEC 3 10x19x5mm

from 4.83 €

incl. 20% VAT
 plus shipping costs.


Quantity pcs
Delivery: Choose a variant
Item number
Factory number
6800 LLB 4,83€ 87920031
6800 LLU MAX 6,04€ 87920109
6800 LLU MAX Black Oxide brüniert 6,65€ 87920154
Please choose a variant.

Enduro Bearings 6800 bearing


  • Bearing-No.: 6800
  • Measures: 10x19x5mm (inner diameter x outer diameter x width)


Our most popular seal type, this is a Nitrile material rubber with a steel insert. Rather than the standard 2RS type seal, we go a step further by machining a groove into the inner race where the seal can rotate with better efficiency and less rolling resistance. Rather than one thick seal lip rubbing on a blunt surface, LLB type utilizes two razor thin sealing lips riding in the groove with light contact. The outside lip keeps the water and contaminates out, while the inner seal retains the grease for smooth function and long intervals between servicing.

Similar to the LLB type seal, LLU is a full contact, dual lip seal riding in a groove on the inner race. With more sealing pressure, these are ideal for pivots or headsets that continually come in contact with dirt, sweat, and dust. The increased seal pressure and 2 lips help retain the 90% grease fill we use on these bearings to better displace any moisture and continually lubricate the balls and races.

ABEC ratings (Annular Bearing Engineer’s Committee) are standards to which each bearing must pass many tests in order to meet the scheduled requirements including noise testing at high RPM, extremely tight tolerances for the internal diameter, outer diameter, roundness of ball, trueness of races, and surface finish for all of the above. Some aspects of ABEC ratings are important for bicycle bearings, but not all. In fact a high ABEC rated number for a bearing does not necessarily mean a high performance, long lasting bearing for your bicycle. For instance, you can have a high ABEC rated bearing that has a race groove only half as deep as ours because this feature is not covered by ABEC ratings. Since the groove would be shallower, there is less surface for the ball to roll on, and easier to pass the noise test. (Less surface contact = lower noise). However, the shallow groove of this bearing can yield less than half the support of our deeper groove design, and can be only half as strong; lasts half as long and becomes rough much sooner. Our deep groove ABEC 3 and ABEC 5 bearings offer the deepest grooves possible in every size, and are more difficult to pass the test due to the improved architecture of our bearings.

Scope of delivery

  • 1 x Enduro Bearings 6800 bearing ABEC_3 10x19x5mm (see item description for details)
Enduro Bearings 6800 ball bearing 6800 LLB ABEC 3 10x19x5mm
Enduro Bearings 6800 ball bearing 6800 LLU ABEC 3 MAX 10x19x5mm
Found a typo? Wrong image?
Statutory warranty rights apply.
AJAX Loader Icon